Scales

Switch View
  • Order directly from Shapeways below — The following was taken from www.collectorsweekly.com : Prior to our disposable metal, paper and plastic oil containers you would purchase oil at a gas stat ...

    1:48 Quart Oil Bottles and Racks

    1:48 Quart Oil Bottles and Racks

  • Order directly from Shapeways below — These are my version of standard glass/ceramic insulators once used to carry telephone and telegraph lines. I have created the models with a 0.025″ ho ...

    1:24 Insulators

    1:24 Insulators

  • This coupling is part of a set of pipe fittings that are designed to connect to Evergreen #224 tubing. This tubing has an Outside Diameter (O.D.) of 0.125″/3,2mm and an Inside Diameter (I.D.) of ...

    1:48 Flanged Coupling-Long

    1:48 Flanged Coupling-Long

  • Order from Shapeways below — These Bollards measure 8,8mm/.346″/30″ FS (full size) along the base. From the bottom of the base to the top is 5,9mm/.232″/20″ FS and the di ...

    1:87 Bollard – Ver 2

    1:87 Bollard – Ver 2

  • Order directly from Shapeways below — Bottles. This is a re-design following the dimension on this page. I rearranged the bottles so they can be (if desired) dipped into paint to color them or b ...

    1:24 Beer/Soda Bottles – Ver2

    1:24 Beer/Soda Bottles – Ver2

  • Order directly from Shapeways below — Bottles. Version 2. I re-arranged the bottles so they can be (if desired) dipped into paint to color them or brush painted .. then flipped around and sit on ...

    1:35 Beer/Soda Bottles – Ver2

    1:35 Beer/Soda Bottles – Ver2

  • Order Directly from Shapeways below – Utility Pole Transformers: These can be modeled as either Single-Phase or Three-Phase depending on the arrangement of the High-Voltage Bushings and how the ...

    HO Utility Pole Transformer

    HO Utility Pole Transformer

  • Order direct from Shapeways below — I scratchbuilt and then 3D printed 6″ Gate Valves for my Pump House. I go into excruciating detail in 6 inch Gate Valve – in that I said – “I made ...

    1:48 Gate Valve – Ver 4b

    1:48 Gate Valve – Ver 4b

  • Order Directly from Shapeways below Tony Burgess asked me if I could do Beer/Soda bottles in HO scale. My feeling was .. yes .. just not sure how well they will print as these would be SMALL!! I went ...

    1:87 Bottles – Ver 5

    1:87 Bottles – Ver 5