Scales

Switch View
  • Order directly from Shapeways below — This is partly based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) i ...

    N Scale Cowl Ventilators

    N Scale Cowl Ventilators

  • Order Directly from Shapeways below – Utility Pole Transformers: These can be modeled as either Single-Phase or Three-Phase depending on the arrangement of the High-Voltage Bushings and how the ...

    O Utility Pole Transformer

    O Utility Pole Transformer

  • This is a test upload for pipe fittings etc. for a Rusty Stumps Backwoods Water tank kit. Walt Gillespie can no longer source the white metal castings that he used in the past so this is an attempt to ...

    Backwoods Water Tank Pipe Parts

    Backwoods Water Tank Pipe Parts

  • Order directly from Shapeways below — To be honest this is a semi-generic design for a fire hydrant based upon the current 5 1/4″ American-Darling B-62-B-5. Introducted in 1962 (hence the ...

    1:24 Fire Hydrant Model 1962 Ver 3

    1:24 Fire Hydrant Model 1962 Ver 3

  • Order directly from Shapeways below — This is a rowboat following a pattern of one I found online = “The Denny” .. but I have only used it as a pattern .. the mesh is completely mine ...

    O scale Rowboat

    O scale Rowboat

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 19,6 mm

    Double-Deck Bitt 19,6 mm

  • Order directly from Shapeways below — Bitts are a pair of posts on the deck of a ship for fastening mooring lines or cables. These bitts can be used in multiple scales as the shape remains the s ...

    Double-Deck Bitt 10,8mm

    Double-Deck Bitt 10,8mm

  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:87 Corrugated Sheet Die – Ver3

    1:87 Corrugated Sheet Die – Ver3

  • Order directly from Shapeways below — This represents welded pipe fittings and is designed to be used with Evergreen #226 tubing which is 4,8 mm OD / 0.187" and 3,3 mm / 0.131" ID. Wha ...

    Welded Pipe Fittings – 90° elbows

    Welded Pipe Fittings – 90° elbows

  • Order directly from Shapeways below — These are common ‘Rattle Can’ paint spray cans both with and without caps. Note on Materials: I will beam offering these in both FUD (Frosted Ul ...

    1:24 Spray Can

    1:24 Spray Can