Scales

Switch View
  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:160 Corrugated Sheet Die – Ver3

    1:160 Corrugated Sheet Die – Ver3

  • Order Directly from Shapeways below 10 ea 4×6 wooden bottle crates with 25 bottles for each crate (you get an extra bottle). So that is a total of 10 crates and 250 bottles ATTENTION!! THIS IS A ...

    HO Wooden Crates and Bottles

    HO Wooden Crates and Bottles

  • Order Directly from Shapeways below These are wooden crates for my HO “Beer/Soda” Bottles. The crates will hold 24 ea bottles. ATTENTION!! THIS IS AN UNPRINTED BETA PRODUCT. THIS MEANS THA ...

    HO 24 bottle wooden crate

    HO 24 bottle wooden crate

  • Order Directly from Shapeways below ATTENTION!! THIS IS A BETA PRODUCT. It has been successfully printed but I have not have any feedback as of yet from the customer. These are switch lamps to fit a L ...

    Lionel Fastrack Switch Lamps

    Lionel Fastrack Switch Lamps

  • Order Directly from Shapeways below I had a message from a gentleman who builds 1:50 scale trucks. He needed various piping to connect with 1/8″ tubing. I re-worked the stud that fits into the I ...

    1:48 Pipe Fittings (test)

    1:48 Pipe Fittings (test)

  • Order Directly from Shapeways below 90° elbows. The flange dia, number and size of bolts means these are Class 150 pipe elbows The studs fit the ID of Evergreen #229 9/32″ tubing. This is prett ...

    1:87 24″ Pipe 90° elbows

    1:87 24″ Pipe 90° elbows

  • These are the four flywheels I test printed. The two smallest have been painted.n (clink on the diagram from a larger version) I can cut about $4.50 off the cost by attaching the flywheels to a sprue ...

    Steam Era Flywheels

    Steam Era Flywheels

  • Order Directly from Shapeways below .. This is my version of the current 5 1/4″ American-Darling B-62-B-5. Introduced in 1962 (hence the model) it is still a current design. I have a 1/32″ hol ...

    1:120 Fire Hydrant Model 1962 Ver 1

    1:120 Fire Hydrant Model 1962 Ver 1

  • Order Directly from Shapeways below These were used to protect the bricks around the opening in the coke oven from the tools of the operators (I am guessing here)   ...

    1:48 Iron Frame for Coke Oven

    1:48 Iron Frame for Coke Oven

  • Order Directly from Shapeways below These represent classic 16″ “Schoolhouse Light Globes”. The center has a 1/16″ hole for inserting an LED. Greg Shinnie did an excellent job ...

    HO 16″ Schoolhouse Light Globes

    HO 16″ Schoolhouse Light Globes