Industrial

Switch View
  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:160 Corrugated Sheet Die – Ver3

    1:160 Corrugated Sheet Die – Ver3

  • Order Directly from Shapeways below I had a message from a gentleman who builds 1:50 scale trucks. He needed various piping to connect with 1/8″ tubing. I re-worked the stud that fits into the I ...

    1:48 Pipe Fittings (test)

    1:48 Pipe Fittings (test)

  • Order Directly from Shapeways below 90° elbows. The flange dia, number and size of bolts means these are Class 150 pipe elbows The studs fit the ID of Evergreen #229 9/32″ tubing. This is prett ...

    1:87 24″ Pipe 90° elbows

    1:87 24″ Pipe 90° elbows

  • These are the four flywheels I test printed. The two smallest have been painted.n (clink on the diagram from a larger version) I can cut about $4.50 off the cost by attaching the flywheels to a sprue ...

    Steam Era Flywheels

    Steam Era Flywheels

  • Order Directly from Shapeways below These were used to protect the bricks around the opening in the coke oven from the tools of the operators (I am guessing here)   ...

    1:48 Iron Frame for Coke Oven

    1:48 Iron Frame for Coke Oven

  • Order direct from Shapeways below — I scratchbuilt and then 3D printed 6″ Gate Valves for my Pump House. I go into excruciating detail in 6 inch Gate Valve – in that I said – “I made ...

    1:48 Gate Valve – Ver 3b

    1:48 Gate Valve – Ver 3b

  • Order Directly from Shapeways below This is a collection of pipe which scales to 24″ in HO .. 90° elbows flange assemblies Tees gate valves The flange dia, number and size of bolts means these ...

    1:87 24 inch Pipe Fittings and Gate Valves

    1:87 24 inch Pipe Fittings and Gate Valves

  • Order Directly from Shapeways below – Utility Pole Transformers: These can be modeled as either Single-Phase or Three-Phase depending on the arrangement of the High-Voltage Bushings and how the ...

    O Utility Pole Transformer

    O Utility Pole Transformer

  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:87 Corrugated Sheet Die – Ver4

    1:87 Corrugated Sheet Die – Ver4

  • Order directly from Shapeways below — This represents welded pipe fittings and is designed to be used with Evergreen #226 tubing which is 4,8 mm OD / 0.187" and 3,3 mm / 0.131" ID. Wha ...

    Welded Pipe Fittings – 90° elbows

    Welded Pipe Fittings – 90° elbows