Industrial

Switch View
  • Order Directly from Shapeways below I have created a topic in my forum to discuss this project – Ore Chute/Gate. Come on by and join the discussion   This is a project of my own .. I have h ...

    O Scale Ore Bin Chutes/Gates

    O Scale Ore Bin Chutes/Gates

  • These represent common 6″ pin insulators. They sit on a sprue shown in red. The idea is to cut the insulators off at the sprue. This exposes the 0.018″ hole in the center. The 0.018″ ...

    O 6in Pin Insulators 100ea

    O 6in Pin Insulators 100ea

  • Order Directly from Shapeways below: This coupling is part of a set of pipe fittings that are designed to connect to Evergreen #224 tubing. This tubing has an Outside Diameter (O.D.) of 0.125″/3 ...

    1:48 6″ nominal pipe Flange

    1:48 6″ nominal pipe Flange

  • Order Directly from Shapeways below This is a set of bushings and insulators for use with my utility pole transformers Transformers: Electric Power Distribution System, Three-Phase and Single-Phase Tr ...

    O scale Utility Pole Set Ver 3

    O scale Utility Pole Set Ver 3

  • Shapeways recently revised the pricing structure for their Frosted Detail Plastics (FUD/FXD) – now the charges include a handling fee, cost per part, material cm3, support cm3 and machine space. ...

    O Scale Roof Ventilators V2

    O Scale Roof Ventilators V2

  • Order Directly from Shapeways Below .. Shapeways recently revised the pricing structure for their Frosted Detail Plastics (FUD/FXD) – now the charges include a handling fee, cost per part, mater ...

    Electric Motor

    Electric Motor

  • Order Directly from Shapeways Below: Hoist. Fits 1/4′ Evergreen IBeam. I made this for 1:48 but of course can be used in other scales. THIS IS IN BETA. UNTIL IT HAS BEEN PRINTED YOU ORDER AT YOU ...

    1:48 I-Beam Hoist

    1:48 I-Beam Hoist

  • Order directly from Shapeways below — Corrugated Sheet Metal: The corrugations are described in terms of pitch (the distance between two crests) and depth (the height from the top of a crest to ...

    1:160 Corrugated Sheet Die – Ver3

    1:160 Corrugated Sheet Die – Ver3

  • Order Directly from Shapeways below I had a message from a gentleman who builds 1:50 scale trucks. He needed various piping to connect with 1/8″ tubing. I re-worked the stud that fits into the I ...

    1:48 Pipe Fittings (test)

    1:48 Pipe Fittings (test)

  • Order Directly from Shapeways below 90° elbows. The flange dia, number and size of bolts means these are Class 150 pipe elbows The studs fit the ID of Evergreen #229 9/32″ tubing. This is prett ...

    1:87 24″ Pipe 90° elbows

    1:87 24″ Pipe 90° elbows